Forme: Or a cutting forme, is the metal “cutter” used to score the cardboard for a die cut finish.
The top coating has been finished with very fine clay resulting in an excellent printing surface for high quality graphics.The bend of a folding carton that is created by using a steal rule that is accepted into a counter or similar female pattern on the metal surface of a platen.A wood or metal form that is used for cutting or stamping out carton blanks.The unglued side flaps that extend and turn down into the carton upon closure to keep dust and other foreign particles out.A flexible plastic material that is used to cover a window in a folding carton.A term referring to a box made from paperboard materials that is cut, creased, and glued into a variety of An adhesive applied to the glue flap during the finishing process of a folding carton.The act of applying the glue during the finishing process of a folding carton.The flap on the end of a folding carton that is applied with glue and adhered to the opposite end to form the carton.The direction of fibers in paperboard.
Folding Carton: Carton usually made of paperboard that is is folded, printed, laminated, cut and glued and then transported ready to be filled and closed by the retailer.
This process can be performed by hand or by the machine.Folding cartons come in a variety of styles.
Typically makeready responsibilities include alignment and are necessary for producing high quality folding cartons.A term describing corrugated material with small flute heights.
Didn't find the term you were looking for? For example, boxboard, cardboard, and cartonboard arc all terms used to describe heavier paper stock.This text follows the recommendations of the American Society for Testing and Materials, Standard Terminology for Abbreviations Relating to Plastics, Designation: D 1600, except as noted.
These are transported and stored flat, and erected at the point of filling.
The use of “case” should be avoided in packaging because of a possible confusion with the use of “case” to indicate “in this instance.” For example, the sentence “Damage was found in three cases” can mean either that damage was found in three physical containers or that damage was found in three instances or situations.Double wall is the combination of two mediums and three facings, and triple-wall is the combination of three mediums and four facings.
It is expressed in units of thousandths of an inch.
"TOP 10 LEADER IN THE SPECIALTY FOOD AND GOURMET COFFEE PACKAGING INDUSTRY!" The trade name is shown for those polymers known primarily by a trade nameEVAL Elhylene-vinyl alcohol (frequently Abbreviated EVOH)mPE Polyethylene manufactured using metallocene catalysts (not yet in ASTM listing)PET Poly (ethylene terephthalate) (frequently abbreviated PETE)PVAC Poly (vinyl acetate) (frequently abbreviated PVA)PVAL Poly (vinyl alcohol) (frequently abbreviated PVOH)PS can be readily expanded with blowing agents to make cellular plastics of varying densities.
Most packaging lithographic presses are sheet fed, although there are some roll-fed presses. Bleached Kraft has a lighter brown color than natural kraft.All preparation and machine set-up times needed before printing, cutting & creasing, windowing, and the gluing of a folding carton. Since 1878, our company has provided our customers with a wide variety of products by using the latest technology, skilled craftsmen and superior customer-service The extended top flap is tucked in and held in place by friction or locked in position.
The process involves folding carton made of paperboard that is printed, laminated, cut, then folded and glued. (i.e. Carton (Of PaperBoard Packaging Council www.ppcnet.org) A unit container made from bending grades of boxboard. A common example is cereal boxes. A stiff grade of boxboard that is made from virgin sulfate pulp.A term referring to the paperboard before being used in the production of a folding carton.A carton that is produced in larger quantities in advance than broken down into smaller quantities for sale to retailers.The removal process of the excess board created by windows, hangers, or the nesting of cartons during the die-cutting process.